The Panel
Steel faced polyurethane (PUR) insulated composite panels are designed to provide a fast, efficient and cost effective coldroom construction system. The system comprises of CFC free polyurethane panels normally faced on both sides with a 0.55mm thick galvanised steel sheet whose edges are vertically lipped by 12mm. The panels have tongue and grooved joints and are connected by a strong cam-lock system. Panels can be manufactured in lengths up to 12m and width of 1200mm.
Fire Performance
The polyurethane foam within the panels is fire retardant to BS4735: 1974. It is also classified as 'P', not easily ignitable when tested to BS476: part 5: 1979. Please note that polyurethane is combustible when exposed to flame and could contribute to the spread of fire.
The Polyurethane panel is not a fire resistant panel. Insurance legislation may restrict the use of these products. Stancold accepts no liability for the suitablity of this product for your project and for insurance purposes would recommend the use of a fire rated Mineral Fibre or PIR.
Panel To Panel Joint
The panels have turned safety edges, cam-locking panel to panel with a tongue and groove insulation detail and silicone joint sealant for a clean hygienic surface.
The Insulation
The polyurethane insulation consists of a two component closed cell rigid polyurethane foam, totally cfc free blowing agents. The foam has been evaluated in combination with panel facings of steel, aluminium and GRP and has shown excellent adhesion and density distribution. The insulation is manufactured from polyol and isocyante.
Panel Facings
Panels can be manufactured with a number of facings including white PVC laminate (foodsafe), polyester, grey primer and stainless steel. Exterior finishes include HP200 plastisol and PVF2. The thickness of the coloured facings are generally 0.55mm with the grey primer being 0.50mm.
| Insulation Core Properties | |
| Density | >38kgm3 |
| Thermal conductivity | 0.020W/mk |
| ODP | 0 |
| Compressive Strength | >200KPa |
| Tensile Strength | >300KPa |
| Water Absorption | <2% / vol |
| Operating Temperature | -50oC to +50oC |
| Panel Data | ||||
| Nominal Panel Thickness mm |
U Value W/m2oC |
Panel Weight kg/m2 |
Max Height Walls m |
Max Ceiling Span to BS6399 part 1. m |
| 80 | 0.23 | 13.5 | 7.5 | 4.0 |
| 100 | 0.20 | 14.5 | 9.0 | 5.0 |
| 125 | 0.16 | 15.5 | 10.0 | 6.1 |
| 150 | 0.13 | 16.5 | 12.0 | 7.7 |
Please visit the Brochures section of our website. Here you can download our Insulated Panel Technical Data Sheets as PDF files.
